Screw In Pole Base
- The easiest way to create a solid base
- No digging or concrete required
- Unscrew to remove and re-position
badminton and swing-ball.
Simply use the turn rod (included) to spiral the screw deep into the ground, then drop your pole (suitable for poles with a diameter from 2.5cm to 5.5cm - 1in to 2ins) into the base and tighten the knobs.
Can be unscrewed and moved around as required.
With rust resistant zinc plating the base is 56cm (22ins) long.
I would like to order 2
The box was damaged on arrival and further inspection revealed the bar to screw the base in the ground was bent this is a substantial piece of metal and must have had some special treatment in transit but then it was Hermes.