Shelving Storage Solution
- Practical storage solution
- Clever inter-locking system
- No need for nuts and bolts
The clever locking system means each of the 4 shelves slot into place without the need for tricky nuts and bolts, just the gentle persuasion of a hammer.
And what's more, you can arrange the shelving as one stand-alone unit (H152cm xW81cm xD30.5cm - H60in xW32in xD12in) or as a standard work or corner bench, just position the shelves at the best height for you.
There are even plastic floor protectors included as well.
The legs and shelf bases are made from heavy duty steel with a grey powder coated finish for extra protection, and the sturdy “drop in” shelves from 9mm MDF for extra rigidity.
Stacked evenly, each shelf can hold up to an incredible 150kg (330lb). Home assembly required.
Once built, they are good. Better with ply shelves. MDF tends to take a set and warps
Did not match my previous purchase of original item, but was near enough to stand alongside.
Alternative version was slightly more difficult to assemble, as it was harder to line up both insert tags at the same time, due to increased flexibility.
I would suggest that the lower of the two tags be increased in length by about 2mm, so that the crossbar could be located in the required slot and tapped down by this amount, before locating the upper one.
Otherwise, it was, when finally assembled, as sturdy and sound as the original.